Main SP Tables-2
SM 5-83 D086/D087
System
Maintenance
2471
[Thin: Leading Edge Correction] Thin Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading
edge in each mode. SP2453 and SP2457 are multiplied by these SP values.
Plain: High speed, 1200: Low speed
The paper leading edge area can be adjusted with SP2472.
001 Paper Transfer: Plain: 1st Side *ENG
[0 to 400 / 100 / 5%/step]
003 Paper Transfer: 1200: 1st Side *ENG
2471
Adjusts the correction to the discharge plate current at the paper leading edge
in each mode. SP2451 is multiplied by these SP values.
The paper leading edge area can be adjusted with SP2472.
005 Separation DC: Plain: 1st Side *ENG
[0 to 400 / 100 / 5%/step]
007 Separation DC: 1200: 1st Side *ENG
2472
[Thin: Switch Timing: Lead. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
plate at the paper leading edge between the erase margin area and the image
area.
Plain: High speed, 1200: Low speed,
001 Paper Transfer: Plain: 1st Side *ENG
[0 to 50 / 0 / 2 mm/step]
003 Paper Transfer: 1200: 1st Side *ENG
005 Separation DC: Plain: 1st Side *ENG
007 Separation DC: 1200: 1st Side *ENG
To Next Page
Loading...
