Main SP Tables-2
D086/D087 5-84 SM
2473
[Thin: Trailing Edge Correction] Thin Paper: Trailing Edge Correction
Adjusts the correction coefficient to the paper transfer roller current for the
paper trailing edge in each mode. SP2453 and SP2457 are multiplied by these
SP values.
Plain: High speed, 1200: Low speed
The paper trailing edge area can be adjusted with SP2474.
001 Paper Transfer: Plain: 1st Side *ENG
[0 to 400 / 100 / 5%/step]
003 Paper Transfer: 1200: 1st Side *ENG
[0 to 400 / 100 / 5%/step]
005 Separation DC: Plain: 1st Side *ENG
[0 to 400 / 100 / 5%/step]
007 Separation DC: 1200: 1st Side *ENG
[0 to 400 / 100 / 5%/step]
2474
[Thin: Switch Timing: Trail. Edge]
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
plate at the paper trailing edge between the erase margin area and the image
area.
Plain: High speed, 1200: Low speed
001 Paper Transfer: Plain: 1st Side *ENG
[0 to 50 / 0 / 2 mm/step]
003 Paper Transfer: 1200: 1st Side *ENG
005 Separation DC: Plain: 1st Side *ENG
[0 to 50 / 0 / 1 mm/step]
007 Separation DC: 1200: 1st Side *ENG
To Next Page
Loading...
