Main SP Tables-2
D086/D087 5-90 SM
2521
[Thick 1: Leading Edge Correction] Thick 1 Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading
edge in each mode. SP2502 and SP2507 are multiplied by these SP values.
Thick 1: Middle speed, 1200: Low speed
The paper leading edge area can be adjusted with SP2522.
001 Paper Transfer: Plain: 1st Side *ENG
[0 to 400 / 100 / 5%/step]
002 Paper Transfer: Plain: 2nd Side *ENG
003 Paper Transfer: 1200: 1st Side *ENG
[0 to 400 / 100 / 5%/step]
005 Separation DC: Plain: 1st Side *ENG
[0 to 400 / 100 / 5%/step]
006 Separation DC: Plain: 2nd Side *ENG
007 Separation DC: 1200: 1st Side *ENG
[0 to 400 / 100 / 5%/step]
2522
[Thick 1: Switch Timing: Lead. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
plate at the paper leading edge between the erase margin area and the image
area.
Thick 1: Middle speed, 1200: Low speed
001
Paper Transfer: Plain 1: 1st
Side
*ENG
[0 to 50 / 0 / 2 mm/step]
002 Paper Transfer: Plain: 2nd Side *ENG
003 Paper Transfer: 1200: 1st Side *ENG
005
Separation DC: Plain 1: 1st
Side
*ENG
[0 to 50 / 0 / 2 mm/step]
006
Separation DC: Plain 1: 2nd
Side
*ENG
007 Separation DC: 1200: 1st Side *ENG
To Next Page
Loading...
