Main SP Tables-2
SM 5-91 D086/D087
System
Maintenance
2523
[Thick 1: Trailing Edge Correction] Thick 1 Paper: Trailing Edge Correction
Adjusts the correction coefficient to the paper transfer roller current for the
paper trailing edge in each mode. SP2502 and SP2507 are multiplied by these
SP values.
Thick 1: Middle speed, 1200: Low speed
The paper trailing edge area can be adjusted with SP2524.
001 Paper Transfer: Plain: 1st Side *ENG
[0 to 400 / 100 / 5%/step]
002 Paper Transfer: Plain: 2nd Side *ENG
003 Paper Transfer: 1200: 1st Side *ENG
005 Paper Transfer: Plain: 1st Side *ENG
006 Paper Transfer: Plain: 2nd Side *ENG
[0 to 400 / 100 / 5%/step]
007 Paper Transfer: 1200: 1st Side *ENG
2524
[Thick 1: Switch Timing: Trail. Edge]
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
plate at the paper trailing edge between the erase margin area and the image
area.
Plain: High speed, 1200: Low speed
001 Paper Transfer: Plain: 1st Side *ENG
[0 to 50 / 0 / 1 mm/step]
002 Paper Transfer: Plain: 2nd Side *ENG
003 Paper Transfer: 1200: 1st Side *ENG
005 Paper Transfer: Plain: 1st Side *ENG
006 Paper Transfer: Plain: 2nd Side *ENG
007 Paper Transfer: 1200: 1st Side *ENG
To Next Page
Loading...
