Main SP Tables-2
SM 5-99 D086/D087
System
Maintenance
2650
[Thick3: Bias]
Adjusts the DC voltage of the discharge plate for thick paper 3.
001 Separation DC: 1st Side *ENG
[0 to 4000 / 1000 / 10 –V/step]
002 Separation DC: 2nd Side *ENG
2651
[Thick3: Bias: BW]
Adjusts the current for the paper transfer roller for thick paper 3 in
black-and-white mode.
001 Paper Transfer: 1st Side *ENG
[0 to 250 / 10 / 1 –
A /step]
002 Paper Transfer: 2nd Side *ENG
[0 to 250 / 12 / 1 –
A /step]
2652
[Thick3: Bias: FC]
Adjusts the current for the paper transfer roller for thick paper 3 in full color
mode.
001 Paper Transfer: 1st Side *ENG
[0 to 250 / 11 / 1 –
A /step]
002 Paper Transfer: 2nd Side *ENG
[0 to 250 / 15 / 1 –
A /step]
2653
[Thick3: Paper Size Correction]
Adjusts the size correction coefficient for the paper transfer roller current for
each paper size. SP2651 and SP2652 are multiplied by these SP values.
001 Paper Transfer: 1st Side: S1 *ENG
[100 to 600 / 100 / 5%/step]
S1 size > 297 mm (Paper
width)
002 Paper Transfer: 1st Side: S2 *ENG
[100 to 600 / 100 / 5%/step]
297 mm > S2 size > 275 mm
(Paper width)
003 Paper Transfer: 1st Side: S3 *ENG
[100 to 600 / 100 / 5%/step]
275 mm > S3 size > 210 mm
(Paper width)
To Next Page
Loading...
