Main SP Tables-2
D086/D087 5-98 SM
2622
[OHP: Switch Timing: Leadn. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
plate at the paper leading edge between the erase margin area and the image
area.
001 Paper Transfer *ENG
[0 to 50 / 0 / 2 mm/step]
002 Separation DC *ENG
2623
[OHP: Trailing Edge Correction] OHP: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing
edge in each mode. SP2603 and SP2608 are multiplied by these SP values.
The paper trailing edge area can be adjusted with SP2624.
001 Paper Transfer *ENG
[0 to 400 / 100 / 5%/step]
002 Separation DC *ENG
2624
[OHP: Trailing Edge Correction]
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
plate at the paper trailing edge between the erase margin area and the image
area.
001 Paper Transfer *ENG
[–100 to 0 / 0 / 1 mm/step]
002 Separation DC *ENG
[0 to 50 / 0 / 2 mm/step]
2630 [OHP: Environment Correction]
001 Separation DC *ENG
[1 to 60 / 22 / 1 /step]
002 Paper Transfer: BW *ENG
[1 to 60 / 11 / 1 /step]
003 Paper Transfer: FC *ENG
[1 to 60 / 1 / 1 /step]
To Next Page
Loading...
