Main SP Tables-2
SM 5-101 D086/D087
System
Maintenance
2654
[Thick 3: Leading Edge Correction] Thick 3 Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading
edge in each mode. SP2651 and SP2652 are multiplied by these SP values.
The paper leading edge area can be adjusted with SP2655.
001 Paper Transfer: 1st Side *ENG
[0 to 400 / 100 / 5%/step]
002 Separation DC: 1st Side *ENG
2654
Adjusts the correction to the discharge plate current at the paper leading edge
in each mode. SP2650 is multiplied by these SP values.
The paper leading edge area can be adjusted with SP2655.
003 Paper Transfer: 2nd Side *ENG
[0 to 400 / 100 / 5%/step]
004 Separation DC: 2nd Side *ENG
2655
[Thick 3: Switch Timing: Lead. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
plate at the paper leading edge between the erase margin area and the image
area.
001 Paper Transfer: 1st Side *ENG
[0 to 50 / 0 / 2 mm/step]
002 Separation DC: 1st Side *ENG
003 Paper Transfer: 2nd Side *ENG
004 Separation DC: 2nd Side *ENG
To Next Page
Loading...
