Main SP Tables-2
D086/D087 5-102 SM
2656
[Thick 3: Trailing Edge Correction] Thick 3 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing
edge in each mode. SP2651 and SP2652 are multiplied by these SP values.
The paper trailing edge area can be adjusted with SP2657.
001 Paper Transfer: 1st Side *ENG
[0 to 400 / 100 / 5%/step]
002 Paper Transfer: 2nd Side *ENG
003 Separation DC: 1st Side *ENG
004 Separation DC: 2nd Side *ENG
2657
[Thick 3: Trailing Edge Correction]
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
plate at the paper trailing edge between the erase margin area and the image
area.
001 Paper Transfer: 1st Side *ENG
[0 to 50 / 0 / 2 mm/step]
002 Paper Transfer: 2nd Side *ENG
003 Separation DC: 1st Side *ENG
004 Separation DC: 2nd Side *ENG
To Next Page
Loading...
