Main SP Tables-2
SM 5-103 D086/D087
System
Maintenance
2660
[Thick 3: Environment Correction] Thick 3 Paper: MM Environment Coefficient
Adjustment
Adjusts the environment coefficient for each mode. When the environment is
detected as MM, SP2651 and SP2652 are multiplied by these SP values.
001 Separation DC: 1st Side *ENG
[1 to 60 / 22 / 1 /step]
002 Separation DC: 2nd Side *ENG
Adjusts the environment coefficient for each mode. When the environment is
detected as MM, SP2650 is multiplied by these SP values.
003 Paper Transfer: BW: 1st Side *ENG
[1 to 60 / 11 / 1 /step]
004 Paper Transfer: BW: 2nd Side *ENG
005 Paper Transfer: FC: 1st Side *ENG
[1 to 60 / 55 / 1 /step]
006 Paper Transfer: FC: 2st Side *ENG
[1 to 60 / 11 / 1 /step]
2670
[Thick4: Bias]
Adjusts the DC voltage of the discharge plate for thick paper 4.
001 Separation DC: 1st Side *ENG
[0 to 4000 / 0 / 10 –V/step]
002 Separation DC: 2nd Side *ENG
2671
[Thick4: Bias: BW]
Adjusts the current for the paper transfer roller for thick paper 4 in
black-and-white mode.
001 Paper Transfer: 1st Side *ENG
[0 to 250 / 10 / 1 –
A /step]
002 Paper Transfer: 2nd Side *ENG
[0 to 250 / 11 / 1 –
A /step]
To Next Page
Loading...
