Energy Save
D086/D087 7-2 SM
Return to Stand-by Mode
Low Power Mode
The recovery time depends on the model and the region.
10 to 15.7 sec.
Off/Sleep Mode
Recovery time.
15 sec.
Recommendation
We recommend that the default settings should be kept.
If the customer requests that these settings should be changed, please explain that their
energy costs could increase, and that they should consider the effects on the
environment of extra energy use.
If it is necessary to change the settings, please try to make sure that the Auto Off timer is
not too long. Try with a shorter setting first, such as 30 min., then go to a longer one
(such as 60 min.) if the customer is not satisfied.
If the timers are all set to the maximum value, the machine will not begin saving energy
until 240 minutes has expired after the last job. This means that after the customer has
finished using the machine for the day, energy will be consumed that could otherwise be
saved.
If you change the settings, the energy consumed can be measured using SP8941, as
explained below.
To Next Page
Loading...
