System SP1-xxx
SM Appendix 3-17 D086/D087
Appendix:
SP Mode
Tables
007
Temp.:M-thick:Center:1 *ENG
[-15 to 15 / -5 / 0.1 deg/step]
Specifies the correction temperature of the heating roller for middle thick paper
when the operation time of the machine is in the interval between control time 1
and control time 2.
008
Temp.:M-thick:Press:1 *ENG
[-10 to 10 / 0 / 0.1 deg/step]
Specifies the correction temperature of the pressure roller for middle thick
paper when the operation time of the machine is in the interval between control
time 1 and control time 2.
009
Temp.:M-thick:Center:2 *ENG
[-15 to 15 / -5 / 0.1 deg/step]
Specifies the correction temperature of the heating roller for middle thick paper
when the operation time of the machine is more than control time 2.
010
Temp.:M-thick:Press:2 *ENG
[-10 to 10 / 0 / 0.1 deg/step]
Specifies the correction temperature of the pressure roller for middle thick
paper when the operation time of the machine is more than control time 2.
011
Temp.:Others:Center:1 *ENG
[-15 to 15 / 0 / 0.1 deg/step]
Specifies the correction temperature of the heating roller for paper type other
than plain and middle thick paper when the operation time of the machine is in
the interval between control time 1 and control time 2.
012
Temp.:Others:Press:1 *ENG
[-10 to 10 / 0 / 0.1 deg/step]
Specifies the correction temperature of the pressure roller for other than palin
and middle thick paper when the operation time of the machine is in the interval
between control time 1 and control time 2.
[Image Processing Temp. Correct]
013
Temp.:Plain:Center:
Level1
*ENG
[-20 to 20 / 0 / 0.1 deg/step]
Specifies the correction temperature for the level 1 of the job image control in
black and white printing mode.