Acquisition and waveform setupMXO 4 Series
117User Manual 1335.5337.02 ─ 07
6.2.4.1 High definition settings
Access: [HD]
High definition is a special acquisition mode of the oscilloscope. This mode has only
one setting - the filter bandwidth.
State
Enables high definition mode, which increases the numeric resolution of the waveform
signal.
Remote command:
HDEFinition:STATe on page 539
Bandwidth
Sets the filter bandwidth for the high definition mode.
Increasing the bandwidth reduces the resulting digital resolution. For dependencies
and details, refer to MXO 4 specifications.
Remote command:
HDEFinition:BWIDth on page 538
Resolution in bits
Displays the resulting vertical resolution in high definition mode. The higher the filter
bandwidth, the lower the resolution.
Remote command:
HDEFinition:RESolution? on page 538
6.2.5 History settings
The history settings are described in Chapter 8.3.2, "History setup", on page 193.
Acquisition
To Next Page
Loading...
