Protocol analysisMXO 4 Series
406User Manual 1335.5337.02 ─ 07
13.7.1 SPMI configuration
13.7.1.1 SPMI configuration settings
Access: [Apps] key > "Protocol" tab > "SPMI" > "Setup".
Make sure that the tab of the correct serial bus is selected.
Protocol type
Displays the protocol type to be decoded.
Remote command:
SBUS<sb>:TYPE on page 704
SDATA
Sets the source of the data line.
Remote command:
SBUS<sb>:SPMI:SDATa:SOURce on page 815
SCLK
Sets the source of the clock line.
Remote command:
SBUS<sb>:SPMI:SCLK:SOURce on page 814
SPMI (option R&S
MXO4-K550)
To Next Page
Loading...
