Protocol analysisMXO 4 Series
317User Manual 1335.5337.02 ─ 07
Available formats are: hex, octal, binary, ASCii, signed, unsigned.
For more information on the available formats, see Chapter 13.1.8, "Bit pattern editor",
on page 320.
Remote command:
SBUS<sb>:FORMat on page 704
Zoom coupling
If enabled, the decode zoom and result table are synchronized. If you select a row in
the result table, this result is shown in the decode zoom.
Remote command:
SBUS<m>:ZCOupling on page 704
Symbols
Symbol lists are protocol-specific. They are described in the respective configuration
chapter of the protocol.
13.1.5 Filter
In the "Filter" tab, you can define the settings to display only the frames that match the
selected filter conditions.
Basics of protocol analysis
To Next Page
Loading...
