Rohde & Schwarz MXO 4 Series - Spectrum Gate

Spectrum analysisMXO 4 Series
251User Manual 1335.5337.02 ─ 07
Remote command:
CALCulate:SPECtrum<sp>:MAGNitude:SCALe on page 650
Vertical maximum
Sets the maximum displayed value on the vertical scale.
Remote command:
CALCulate:SPECtrum<sp>:MAGNitude:LEVel on page 650
Vertical range
Sets the range of the spectrum values to be displayed.
Remote command:
CALCulate:SPECtrum<sp>:MAGNitude:RANGe on page 650
Frequency axis
Defines the scaling method for the frequency axis (x-axis) of the spectrogram.
Available are logarithmic and linear scaling.
Remote command:
CALCulate:SPECtrum<sp>:FREQuency:SCALe on page 647
10.5 Spectrum gate
Access: "Menu" > "Spectrum" > "Scale"
Spectrum gating restrict the spectrum analysis to a user-defined region of the captured
time domain signal.
Start
Sets the starting value for the gate.
Remote command:
CALCulate:SPECtrum<sp>:GATE:STARt on page 654
Stop
Sets the end value for the gate.
Spectrum gate