Operating the instrumentMXO 4 Series
53User Manual 1335.5337.02 ─ 07
Figure 4-5: Signal label
1 = Vertical scale
2 = Offset
3 = Bandwidth
4 = Coupling and termination
If many waveforms are active, then waveforms of the same type are grouped in one
signal icon. Tap the group icon to open the individual signal icons.
4.2.2 Control elements on the GUI
The GUI provides everything that you need to control the instrument, to analyze wave-
forms, and to get measurement results. Figure 4-6 shows the control elements at a
glance.
Figure 4-6: Control elements on the graphical user interface
1 = Toolbar
2 = Tab in a dialog box
3 = Dialog box
4 = Result table
5 = Signal bar
6 = Menu
Touchscreen display
To Next Page
Loading...
