Operating the instrumentMXO 4 Series
61User Manual 1335.5337.02 ─ 07
4. To get the factory configuration of the toolbar, select "Restore default".
A detailed description of the toolbar functions is given in Chapter 4.6.3, "Toolbar func-
tions", on page 61.
Remote commands:
●
DISPlay:TOOLbar:COUNt? on page 493
●
DISPlay:TOOLbar:DESelect on page 493
●
DISPlay:TOOLbar:RESTore on page 493
4.6.3 Toolbar functions
This section describes all toolbar functions in detail.
You can configure the content of the toolbar, see Chapter 4.6.2, "Configuring the tool-
bar", on page 60.
The following list describes at first the default toolbar functions and then the additional
functions.
Undo
Undoes the last setting actions step by step. Some actions cannot be revoked: locking
the touchscreen with [Touch Lock], and saving data.
Redo
Recovers the undo steps in reverse order.
Toolbar
To Next Page
Loading...
