Protocol analysisMXO 4 Series
322User Manual 1335.5337.02 ─ 07
The data bits of a message are grouped by the following criteria:
●
A word contains several successive bits. The word length is defined in the protocol
configuration.
●
A frame contains several successive words, at least one word.
13.2.2 SPI configuration
13.2.2.1 SPI configuration settings
Access: [Apps] key > "Protocol" tab > "SPI" > "Setup".
Make sure that the tab of the correct serial bus is selected.
Protocol type
Displays the protocol type to be decoded.
Remote command:
SBUS<sb>:TYPE on page 704
SPI bus (option R&S
MXO4-K510)
To Next Page
Loading...
