ApplicationsMXO 4 Series
287User Manual 1335.5337.02 ─ 07
11.2.4 Deskew
In the dialog box you can perform a deskew of your current and voltage probes.
Required equipment:
●
R&S RT-ZF20 power deskew fixture
●
Rohde & Schwarz voltage probe
●
Rohde & Schwarz current probe
11.2.4.1 Deskew settings
Skew channel
Sets user-defined skew settings for the channel connected to the current probe.
Alternatively, you can start an "Auto Deskew".
Auto Deskew
Starts an auto deskew. It is used to determine the trigger and scaling properties.
For an auto deskew, only Rohde & Schwarz probes are supported.
Make sure that the probes are configured correctly before you start the deskewing.
Power analysis (option R&S
MXO4-K31)
To Next Page
Loading...
