Rohde & Schwarz MXO 4 Series - Grid

Instrument setupMXO 4 Series
85User Manual 1335.5337.02 ─ 07
Color
Shows the current color of the selected waveform. To change the color, tap the button
to open the "Color" dialog.
In the dialog, you can pick from a list of basic colors, or define a color with the color
picker.
The color of the waveform, its signal icon, and of the illuminated keys is adjusted to the
new color. If the waveform is a spectrum, the knobs for vertical scale and position
retain the color of the spectrum's source.
Remote command:
DISPlay:COLor:SIGNal:COLor on page 494
Set to default color
Resets the color of the selected waveform to the factory default.
Remote command:
DISPlay:COLor:SIGNal:COLor <Signal>,DEF
5.3.2 Grid
Access: "Settings" > "Appearance" > "Grid"
Appearance settings