Waveform analysisMXO 4 Series
177User Manual 1335.5337.02 ─ 07
8 Waveform analysis
This chapter describes general methods to check and analyze waveforms. These are:
● Zoom.....................................................................................................................177
● Mathematics..........................................................................................................181
● History...................................................................................................................192
● Reference waveforms........................................................................................... 198
8.1 Zoom
The zoom magnifies a part of the waveform to view more details. The zoom is applied
to all waveforms that are visible in a diagram.
For each diagram, you can define one zoom area.
●
You can define the zoom by drawing, moving and adjusting the zoom area on the
touchscreen.
●
You can precisely define the size of the zoom area by entering start and stop val-
ues in a dialog box.
Zoom areas can be used for gating, for example, to define a measurement gate. You
can set the gate exactly to the limits of the zoom.
8.1.1 Zoom settings
Access: "Menu" > "Horizontal" > "Zoom" tab.
The "Zoom" tab allows you to specify start and stop values for the x- and y-axes. The
acquired data within these ranges is zoomed.
Zoom
To Next Page
Loading...
