Data and file managementMXO 4 Series
299User Manual 1335.5337.02 ─ 07
"Gate"
Saves the data included in the measurement gate if a gated mea-
surement is defined for the source waveform. Select the "Gate" to be
used for export.
"Manual"
Saves the data between user-defined "Start" and "Stop" values.
Remote command:
EXPort:WAVeform:SCOPe on page 607
EXPort:WAVeform:CURSorset on page 609
EXPort:WAVeform:GATE on page 609
EXPort:WAVeform:STARt on page 608
EXPort:WAVeform:STOP on page 608
Save settings
Defines the details of the filename, extension and directory.
"File name"
Sets a name for the file, without extension.
"Extension"
Selects the format of the exported file.
You can select between "Excel-CSV-File (*.csv)" and a "Reference
Waveform Format (*.ref)". REF files can be reloaded as reference
waveforms. See also: Chapter 12.2.3, "Waveform export files",
on page 301.
"Directory"
Opens a file explorer where you can select the directory where the
file is saved.
"Save as"
Opens a file explorer where you can select the directory and enter the
filename.
"Save"
Saves the file in the defined "Directory" using the defined "File name".
If the specified file already exists, it is overwritten with the new data.
A progress bar informs you about the process, see "Progress information" on page 72.
Remote command:
EXPort:WAVeform:NAME on page 606
EXPort:WAVeform:SAVE on page 607
12.2.2 Saving waveforms
To save a waveform
1. Open "Menu" > "Save/Recall".
2. In the "Save" tab, tap "Waveform".
Save and recall waveform data
To Next Page
Loading...
