Instrument setupMXO 4 Series
101User Manual 1335.5337.02 ─ 07
5.8 Save / recall
5.8.1 Autonaming
Access:"Menu" > "Settings" key > "Save/Recall" > "Autonaming" tab.
5.8.1.1 Autonaming settings
In the "Autonaming" tab, you can define the pattern for automatic file name generation.
This name is used as the default file name. The default path is the storage location for
all saved files and their subdirectories. The directory for user data on the instrument
is /home/storage/userData, the path to a USB storage device
is /run/media/usb/.
User text
If enabled, inserts the specified user text after the prefix.
Remote command:
MMEMory:AUTonaming:USERtext on page 502
MMEMory:AUTonaming:TEXT on page 503
Save / recall
To Next Page
Loading...
