Data and file managementMXO 4 Series
294User Manual 1335.5337.02 ─ 07
12.1.1 Using savesets
Savesets contain the complete instrument and measurement configuration. You can
save an unlimited number of setting files.
To save settings to a saveset file
1. Open "Menu" > "Save/Recall".
2. In the "Save" tab, tap the "Saveset" button.
The save "Saveset" dialog opens.
Figure 12-3: Save saveset dialog
3. If needed, enable "Include toolbar, font and grid settings".
4. Check the path on the "Directory" button. If the path does not fit, tap the button.
Navigate to the folder, where you want to save the settings file.
5. Tap "Save to file".
Alternatively, select "Save As" and select the destination folder and file name in the
file selection dialog.
The current settings are saved to the selected file.
Save and recall user settings
To Next Page
Loading...
