Rohde & Schwarz MXO 4 Series - Logic Configuration

Remote control commandsMXO 4 Series
846User Manual 1335.5337.02 ─ 07
Parameters:
<State> ON | OFF
Usage: Asynchronous command
DIGital<m>:THReshold <Value>
Sets the logical threshold for the channel group to which the indicated digital channel
belongs.
The setting affects only the settings of the first MSO bus (Logic1).
You can set the threshold for all buses with PBUS<pb>:TECHnology or PBUS<pb>:
THReshold<n>
See also: DIGital<m>:THCoupling on page 845
Suffix:
<m>
.
0..15
Number of the digital channel.
Channel groups: 0..3; 4..7; 8..11; 12..15
Parameters:
<Value>
Usage: Asynchronous command
17.17.2 Logic configuration
The following commands configure the four logic groups of R&S MXO4-B1.
PBUS<pb>:BIT<n>:LABel...............................................................................................847
PBUS<pb>:BIT<n>:SKEW.............................................................................................. 847
PBUS<pb>:BIT<n>[:STATe].............................................................................................847
PBUS<pb>:CLEar..........................................................................................................848
PBUS<pb>:CLOCk.........................................................................................................848
PBUS<pb>:CLON.......................................................................................................... 848
PBUS<pb>:CLSLope......................................................................................................849
PBUS<pb>:DECTable:SHOW..........................................................................................849
PBUS<pb>:DECTable:COUNt?....................................................................................... 849
PBUS<pb>:DECTable:DATA?..........................................................................................850
PBUS<pb>:DIGSignals:POSition..................................................................................... 850
PBUS<pb>:DIGSignals:SCALe........................................................................................850
PBUS<pb>:DISPlay:SHBU..............................................................................................850
PBUS<pb>:DISPlay:SHDI...............................................................................................851
PBUS<pb>:HYSTeresis<n>.............................................................................................851
PBUS<pb>:POSition...................................................................................................... 852
PBUS<pb>:SCALe.........................................................................................................852
PBUS<pb>:SKEW..........................................................................................................852
PBUS<pb>:STATe..........................................................................................................852
Mixed signal option (option R&S
MXO4-B1)