Rohde & Schwarz MXO 4 Series - Spectrum Setup

Spectrum analysisMXO 4 Series
247User Manual 1335.5337.02 ─ 07
10.3 Spectrum setup
Access: "Menu" > "Spectrum" > "Setup" tab.
In this tab, you define the settings for the spectrum window. The display can be restric-
ted to the results for a certain time base extract and to a specified frequency range.
Display
Enables the spectrum.
Remote command:
CALCulate:SPECtrum<sp>:STATe on page 651
Source
Selects the source for the spectrum.
Remote command:
CALCulate:SPECtrum<sp>:SOURce on page 651
Spectrum setup