Rohde & Schwarz MXO 4 Series - Appearance

Remote control commandsMXO 4 Series
493User Manual 1335.5337.02 ─ 07
DISPlay:TOOLbar:COUNt?
Returns the number of tools that are currently assigned to the toolbar.
Return values:
<ToolCount> Range: 0 to 100
Increment: 1
*RST: 8
Usage: Query only
Asynchronous command
DISPlay:TOOLbar:DESelect
Removes all tools from the toolbar.
Usage:
Setting only
SCPI confirmed
Asynchronous command
DISPlay:TOOLbar:RESTore
Resets the toolbar to the factory configuration.
Usage:
Setting only
SCPI confirmed
Asynchronous command
17.7.4 Appearance
● Waveform colors................................................................................................... 493
● Grid appearance................................................................................................... 495
● Dialog appearance................................................................................................496
● Peak list appearance.............................................................................................497
17.7.4.1 Waveform colors
DISPlay:COLor:SIGNal:CATalog?.................................................................................... 493
DISPlay:COLor:SIGNal:COLor........................................................................................ 494
DISPlay:COLor:SIGNal:ASSign....................................................................................... 494
DISPlay:COLor:SIGNal:USE........................................................................................... 494
DISPlay:COLor:SIGNal:CATalog?
Returns a comma-separated list of valid signal names. The signal names are needed
in other DISPlay:COLor commands to set the <Signal> parameter.
Usage:
Query only
Asynchronous command
Instrument setup