Instrument setupMXO 4 Series
77User Manual 1335.5337.02 ─ 07
The LAN settings are configured in the "Advanced" dialog, or using the instrument's
web browser (see Chapter 16.2, "Web interface", on page 453).
Advanced
Opens a dialog box to configure the network connection.
You need these settings to configure the LAN connection manually, without DHCP.
NOTICE! Connection errors can affect the entire network. Make sure to assign valid
address information before connecting the instrument to the LAN. Contact your net-
work administrator to obtain a valid IP address and other connection data.
See also: Chapter 16.1, "Connecting the instrument to the network (LAN)",
on page 451.
5.1.3 Remote settings
Access: "Menu" > "Settings" > "System" > "Remote".
System settings
To Next Page
Loading...
