Rohde & Schwarz MXO 4 Series - Save and Recall Waveform Data; Waveform Settings

Data and file managementMXO 4 Series
297User Manual 1335.5337.02 ─ 07
Remote commands:
●
GENerator:SAV on page 606
●
GENerator:RCL on page 606
12.2 Save and recall waveform data
You can save waveform data to file, and reload the data of REF files as reference
waveforms.
12.2.1 Waveform settings
Access: "Menu" > "Save/Recall" > "Save" tab > "Waveform".
In this dialog, you define the storage settings for waveform data.
Save and recall waveform data