Rohde & Schwarz MXO 4 Series - Results

Remote control commandsMXO 4 Series
619User Manual 1335.5337.02 ─ 07
MEASurement<mg>:GATE <Gate>
Sets the gate of the indicated measurement. Enable a gate before you assign a mea-
surement to it (GATE<g>:ENABle =ON).
The query returns 0, if no gate is assigned.
Suffix:
<mg>
.
1...16, index of the measurement
Parameters:
<Gate> Number of the gate to be used
Usage: Asynchronous command
Manual operation: See "Measurements gated by G<x>" on page 222
MEASurement<mg>:REFLevel<sc>:REFerence
<RefLevelSet>
Selects the set of reference levels that is used for the measurement and for the indica-
ted source. Each source of the measurement can have its own reference level set.
Suffix:
<mg>
.
1...16, index of the measurement
<sc> 1...3
Source waveform, to which the reference level set is applied.
Parameters:
<RefLevelSet> Number of the reference level set. Define the reference level set
before you use it.
Example:
MEASurement1:MAIN DELay
MEASurement1:SOURce C1,C2
MEASurement1:REFLevel1:REFerence 1
MEASurement1:REFLevel2:REFerence 2
Measurement 1 is a delay measurement on channel 1 and chan-
nel 2. C1 is the first source and uses reference level set 1 (RL1).
C2 is the second source and uses reference level set 2 (RL2).
Usage: Asynchronous command
Manual operation: See "Reference levels" on page 232
17.12.3 Results
MEASurement<mg>:RESult[:ACTual]?.............................................................................620
MEASurement<mg>:RESult:AVG?...................................................................................620
MEASurement<mg>:RESult:NPEak?............................................................................... 620
MEASurement<mg>:RESult:PPEak?............................................................................... 620
MEASurement<mg>:RESult:RELiability?..........................................................................620
MEASurement<mg>:RESult:RMS?.................................................................................. 620
MEASurement<mg>:RESult:WFMCount?.........................................................................620
Automatic measurements