Rohde & Schwarz MXO 4 Series - CAN Trigger Settings

Protocol analysisMXO 4 Series
377User Manual 1335.5337.02 ─ 07
"Field"
Enables the field type that you want to filter on for the selected frame.
The available fields are "ID", "RTR", "ITE", "RLC" and "Data".
Remote command:
SBUS<sb>:CAN:FILTer:FIENable on page 780
SBUS<sb>:CAN:FILTer:FRAMe<fr>:FLD<fl>:ENABle
on page 780
"Condition"
Displays the value condition for the selected field.
Remote command:
SBUS<sb>:CAN:FILTer:BIT on page 778
SBUS<sb>:CAN:FILTer:FRAMe<fr>:FLD<fl>:BIT on page 778
"Data"
The data setup consists of a comparison condition and one or two
data patterns.
Remote command:
SBUS<sb>:CAN:FILTer:DMAX on page 779
SBUS<sb>:CAN:FILTer:FRAMe<fr>:FLD<fl>:DMAX
on page 779
SBUS<sb>:CAN:FILTer:DMIN on page 779
SBUS<sb>:CAN:FILTer:FRAMe<fr>:FLD<fl>:DMIN
on page 779
SBUS<sb>:CAN:FILTer:DOPerator on page 779
SBUS<sb>:CAN:FILTer:FRAMe<fr>:FLD<fl>:DOPerator
on page 779
"Index"
The index setup consists of a comparison condition and one or two
index values.
Remote command:
SBUS<sb>:CAN:FILTer:IMAX on page 781
SBUS<sb>:CAN:FILTer:FRAMe<fr>:FLD<fl>:IMAX
on page 781
SBUS<sb>:CAN:FILTer:IMIN on page 781
SBUS<sb>:CAN:FILTer:FRAMe<fr>:FLD<fl>:IMIN
on page 781
SBUS<sb>:CAN:FILTer:IOPerator on page 782
SBUS<sb>:CAN:FILTer:FRAMe<fr>:FLD<fl>:IOPerator
on page 782
Error type
Enables filtering on the selected error type.
Remote command:
SBUS<sb>:CAN:FILTer:ERENable on page 780
SBUS<sb>:CAN:FILTer:ERRor<n>:ENABle on page 780
13.5.3 CAN trigger settings
Access: [Apps] > "Protocol" > "CAN" > "Shortcuts" > "Setup trigger"
CAN (option R&S
MXO4-K520)