Protocol analysisMXO 4 Series
378User Manual 1335.5337.02 ─ 07
Type
Selects the trigger type for CAN analysis.
Some trigger types have additional settings that can be defined. In this case, the "Set
details" button appears next to "Type" the function. Open it for a detailed definition of
the trigger conditions.
"Start of frame"
Triggers on the first edge of the dominant SOF bit (synchronization
bit).
"End of frame"
Triggers on the end of frame.
"Frame type"
Triggers on a specified frame type (data, remote, error, or overload).
For data and remote frames, also the identifier format is considered.
CAN (option R&S MXO4-K520)
To Next Page
Loading...
