Instrument setupMXO 4 Series
87User Manual 1335.5337.02 ─ 07
Remote command:
DISPlay:DIAGram:CROSshair on page 495
Keep X-grid fixed
If enabled, the vertical grid lines remain in their position when the horizontal position is
changed. Only the values at the grid lines are adapted.
Remote command:
DISPlay:DIAGram:XFIXed on page 496
Keep Y-grid fixed
If enabled, the horizontal grid lines remain in their position when the position of the
curve is changed. Only the values at the grid lines are adapted.
Fixed horizontal grid lines correspond to the behavior of traditional oscilloscopes.
Remote command:
DISPlay:DIAGram:YFIXed on page 496
Show div label (x)
If selected, the time scale value is shown at the diagram bottom instead of the horizon-
tal grid labels. For example, 10 ns/div is shown instead of the values 0, 10, 20, 30... ns.
5.3.3 Dialogs
Access: "Settings" > "Appearance" > "Dialogs"
Font size (Dialog)
Sets the font size of the text in dialog boxes.
Appearance settings
To Next Page
Loading...
