Operating the instrumentMXO 4 Series
65User Manual 1335.5337.02 ─ 07
4.8 Using dialog boxes
All functionality is provided in dialog boxes as known from computer programs. You
can control the instrument intuitively with the touchscreen. This section provides an
overview of the accessing methods and describes how to use the dialog boxes.
Each dialog box has three icons in the upper right corner:
Closes the dialog box
Opens the help window for the dialog
Shift sideways to change the transparency of the dialog box
For direct access to important control and measurement functions, use the toolbar, see
Chapter 4.6, "Toolbar", on page 60.
To open a dialog box
► Perform one of the following actions:
● Open the "Menu", and select the menu entry.
● Press the function key on the front panel.
●
Double-tap a result icon, or tap the
icon in a result box to open the corre-
sponding dialog box.
● To open the "Vertical" dialog box of a waveform, tap the signal icon.
● Tap the "Horizontal", "Acquisition" or "Trigger" label to open the corresponding
dialog box.
To close a dialog box
► Tap the "Close" icon in the upper right corner.
4.9 Entering data
To set parameter values and enter other data, you use the various knobs and the on-
screen keypad or keyboard.
Using scale, position and level knobs
The instrument has dedicated rotary knobs to set vertical and horizontal positions and
scale, and the trigger level.
1. Turn the knob to change the value.
2. Press the knob:
● [Scale]: to toggle the increment.
Entering data
To Next Page
Loading...
