Rohde & Schwarz MXO 4 Series - Statistics

Remote control commandsMXO 4 Series
622User Manual 1335.5337.02 ─ 07
Suffix:
<mg>
.
1...16, index of the measurement
Setting parameters:
<EventIndex> Index number of the measured event.
Return values:
<EventStop> Range: -1E+26 to 1E+26
Increment: 0
*RST: 0
Usage: Query only
Asynchronous command
MEASurement<mg>:RESult:EVENts:VALue?
<MeasResEvtIdx>
Returns the measured value of the indicated measured event.
The command is relevant for measurements of all events, see MEASurement<mg>:
MULTiple.
Suffix:
<mg>
.
1...16, index of the measurement
Setting parameters:
<EventIndex> Index number of the measured event.
Return values:
<EventValue> Range: -1E+26 to 1E+26
Increment: 1E-10
*RST: 0
Usage: Query only
Asynchronous command
17.12.4 Statistics
MEASurement<mg>:STATistics:ARESet...........................................................................622
MEASurement<mg>:STATistics[:ENABle]......................................................................... 623
MEASurement<mg>:MULTiple.........................................................................................623
MEASurement<mg>:MNOMeas.......................................................................................623
MEASurement<mg>:STATistics:ARESet
Resets the statistics for all measurements.
Suffix:
<mg>
.
Irrelevant, omit the suffix.
Usage: Setting only
Asynchronous command
Manual operation: See "Clear results" on page 237
Automatic measurements