TriggerMXO 4 Series
174User Manual 1335.5337.02 ─ 07
7.8 Actions on trigger
Access: "Menu" > "Trigger" > "Action" tab
The action settings define what happens when a trigger occurs. All available actions
can be initiated at the same time.
Trigger out
Selects, if a pulse is provided to the [Trigger Out] connector on the rear panel. The trig-
ger-out signal is used to synchronize the measurements of other instruments.
To adjust the outgoing signal, tap "Set trigger out".
Remote command:
TRIGger:ACTions:OUT:STATe on page 571
Set trigger out
Opens a dialog to adjust the trigger out pulse.
Actions on trigger
To Next Page
Loading...
