TriggerMXO 4 Series
157User Manual 1335.5337.02 ─ 07
Level
Sets the threshold for the high and low signal states.
Remote command:
TRIGger:EVENt<ev>:LEVel<n>[:VALue] on page 541
Range
Sets the relation of the signal level to the trigger level for the timeout trigger.
"Stays high"
The signal level stays above the trigger level.
"Stays low"
The signal level stays below the trigger level.
"High or low"
The signal level stays above or below the trigger level.
Remote command:
TRIGger:EVENt<ev>:TIMeout:RANGe on page 555
Time
Sets the time limit for the timeout at which the instrument triggers.
Remote command:
TRIGger:EVENt<ev>:TIMeout:TIME on page 555
7.4.8 Interval trigger
Access: "Menu" > "Trigger" > "Setup" tab > "Type = Interval"
The interval trigger analyzes the time between two pulses.
Trigger types
To Next Page
Loading...
