Rohde & Schwarz MXO 4 Series - Screenshots

Remote control commandsMXO 4 Series
610User Manual 1335.5337.02 ─ 07
EXPort:RESult:SELect:CURSor <CursorResult>
Includes the current cursor results in the export file.
Parameters:
<CursorResult> ON | OFF
*RST: OFF
Usage: Asynchronous command
EXPort:RESult:SELect:MEASurement <MeasResult>
Includes the current automatic measurement results in the export file.
Parameters:
<MeasResult> ON | OFF
*RST: OFF
Usage: Asynchronous command
17.11.6 Screenshots
The HCOPy subsystem and some other commands control the output of display infor-
mation for documentation purposes. The instrument allows two independent output
configurations which can be set separately with the suffix.
Note that the remote mode is intended for maximum performance. Therefore, the dis-
play does not follow the remote commands constantly. To get a correct screenshot,
turn the display on using SYSTem:DISPlay:UPDate.
HCOPy:DESTination<m>................................................................................................610
MMEMory:NAME............................................................................................................611
HCOPy:DEVice<m>:LANGuage...................................................................................... 611
HCOPy:DEVice<m>:INVerse........................................................................................... 611
HCOPy:IMMediate<m>:NEXT......................................................................................... 612
HCOPy:IMMediate<m>[:DUM].........................................................................................612
HCOPy:ISBA.................................................................................................................612
HCOPy:SSD..................................................................................................................613
HCOPy:WBKG.............................................................................................................. 613
HCOPy:DESTination<m> <medium>
Selects the output medium: file or clipboard.
Suffix:
<m>
.
1..2
Selects the output configuration.
Data management