Data and file managementMXO 4 Series
300User Manual 1335.5337.02 ─ 07
Figure 12-7: Save waveform dialog
3. Select the "Source".
4. Select the "Export mode" to define the part of the waveform to be exported.
5. If necessary, define the cursor, gate or start/stop values for the data.
6. Select the format of the export file: "Extension".
7. Set the "File name".
8. Tap "Save" or "Save as".
The current waveform is saved to the selected file. A progress bar informs you
about the saving process.
Save and recall waveform data
To Next Page
Loading...
