Rohde & Schwarz MXO 4 Series - Page 654

Remote control commandsMXO 4 Series
654User Manual 1335.5337.02 ─ 07
Usage: Asynchronous command
Manual operation: See "Position" on page 252
CALCulate:SPECtrum<sp>:GATE:STARt <Start>
Sets the starting value for the gate.
Suffix:
<sp>
.
1
Parameters:
<Start> Range: -1E+26 to 1E+26
Increment: 0.01
*RST: 0.01
Default unit: HZ
Usage: Asynchronous command
Manual operation: See "Start" on page 251
CALCulate:SPECtrum<sp>:GATE:STOP <Stop>
Sets the end value for the gate.
Suffix:
<sp>
.
1
Parameters:
<Stop> Range: -1E+26 to 1E+26
Increment: 0.01
*RST: 0.01
Default unit: HZ
Usage: Asynchronous command
Manual operation: See "Stop" on page 251
CALCulate:SPECtrum<sp>:GATE:WIDTh <Span>
Defines the width of the displayed gate.
Suffix:
<sp>
.
1
Parameters:
<Span> Range: 0 to 1E+26
Increment: 0.01
*RST: 0.01
Default unit: HZ
Usage: Asynchronous command
Manual operation: See "Width" on page 252
Spectrum analysis