Safety and regulatory informationMXO 4 Series
18User Manual 1335.5337.02 ─ 07
Reconfigure or adjust the product only as described in the product documentation or
the specifications document. Any other modifications can affect safety and are not per-
mitted.
Never open the casing of the product. Only service personnel authorized by
Rohde & Schwarz are allowed to repair the product. If any part of the product is dam-
aged or broken, stop using the product. Contact Rohde & Schwarz customer support at
https://www.rohde-schwarz.com/support.
In these safety instructions, the term "product" covers instruments (oscilloscopes),
probes and their accessories.
Lifting and carrying the instrument
Check the specifications document for the maximum weight of the instrument. A single
person can only carry a maximum of 18 kg safely depending on age, gender and phys-
ical condition. If your instrument is heavier than 18 kg, do not move or carry it by your-
self.
Use the instrument handles to move or carry the instrument. Do not use the mounted
accessories instead of the handles. Accessories are not designed to carry the weight
of the instrument.
To move the instrument safely, you can use lifting or transporting equipment such as lift
trucks and forklifts. Follow the instructions provided by the equipment manufacturer.
Choosing the operating site
Only use the product indoors. The product casing is not waterproof. Water that enters
can electrically connect the casing with live parts, which can lead to electric shock,
serious personal injury or death if you touch the casing.
If Rohde & Schwarz provides accessories designed for outdoor use of your product,
e.g. a protective cover, you can use the product outdoors.
You can operate the product up to an altitude of 2000 m above sea level. If a higher
altitude is permissible, the value is provided in the specifications document. The prod-
uct is suitable for pollution degree 2 environments where nonconductive contamination
can occur. For more information on environmental conditions such as ambient temper-
ature and humidity, see the specifications document.
Setting up the product
Always place the product on a stable, flat and level surface with the bottom of the prod-
uct facing down. If the product is designed for different positions, secure the product so
that it cannot fall over.
If the product has foldable feet, always fold the feet completely in or out to ensure sta-
bility. The feet can collapse if they are not folded out completely or if the product is
moved without lifting it. The foldable feet are designed to carry the weight of the prod-
uct, but not an extra load.
If stacking is possible, keep in mind that a stack of products can fall over and cause
injury.
Safety instructions
To Next Page
Loading...
