Rohde & Schwarz MXO 4 Series - Page 35

Getting StartedMXO 4 Series
35User Manual 1335.5337.02 ─ 07
Figure 3-1: Front panel of MXO 4
1 = Display
2 = Keys and controls
3 = BNC connector for external trigger input
4 = Analog input channels
5 = Connectors for probe compensation
6 = Connectors for demo signal output
7 = USB connectors
8 = Connectors for logic probe (R&S MXO4-B1 Mixed Signal Option)
9 = BNC connector for optional function generator output (R&S MXO4-B6 arbitrary waveform generator
option )
10 = [Power] key
3.2.1.1 Input connectors
Analog channel inputs
The MXO 4 has 4 channel inputs to connect the input signals.
You can connect probes with Rohde & Schwarz probe interface or BNC connectors.
The input impedance is selectable, the values are 50 Ω and 1 MΩ.
Instrument tour