Getting StartedMXO 4 Series
38User Manual 1335.5337.02 ─ 07
Figure 3-3: Rear panel view of MXO
4
1 = Trigger Out connector
2 = Ref. In 10MHz
3 = Ref. Out
4 = LAN connector
5 = HDMI display output
6 = USB B connector, type B
7 = USB connector
8 = AC power supply connector and main power switch
9 = Kensington lock slot to secure the instrument against theft
10 = VESA mounting holes to mount the instrument on a monitor arm
Trigger Out
BNC output that can function as pass/fail output or trigger output.
Ref. In 10MHz
BNC input connector for 10 MHz reference frequency signals.
Ref. Out
BNC output for 10 MHz frequency reference. Can be switched between internal and
external reference.
Instrument tour
To Next Page
Loading...
