Rohde & Schwarz MXO 4 Series - Page 400

Protocol analysisMXO 4 Series
400User Manual 1335.5337.02 ─ 07
Frame type
Selects the frame type that you want to display. You can filter all enabled frame types
simultaneously.
For each frame type, you can also specify conditions for the value of the fields in the
"Edit" dialog.
Available frames are "Data", "Wake" and "Unknown".
Remote command:
SBUS<sb>:LIN:FILTer:FRENable on page 805
SBUS<sb>:LIN:FILTer:FRAMe<fr>:ENABle on page 805
Edit
Opens a dialog to define the details of the selected frame.
"Field"
Enables the field type that you want to filter on for the selected frame.
The available fields are "Id" and "Data".
Remote command:
SBUS<sb>:LIN:FILTer:FIENable on page 804
SBUS<sb>:LIN:FILTer:FRAMe<fr>:FLD<fl>:ENABle
on page 804
"Condition"
Displays the value condition for the selected field.
Remote command:
SBUS<sb>:LIN:FILTer:BIT on page 803
SBUS<sb>:LIN:FILTer:FRAMe<fr>:FLD<fl>:BIT on page 803
LIN (option R&S MXO4-K520)