Rohde & Schwarz MXO 4 Series - Page 486

Remote control commandsMXO 4 Series
486User Manual 1335.5337.02 ─ 07
Parameters:
<Year> Year, to be entered as a four-digit number (including the century
and millennium information)
Range: 2012 to 2099
Increment: 1
*RST: 2012
<Month> Month, 1 (January) to 12 (December)
Range: 1 to 12
Increment: 1
*RST: 1
<Day> Day, 1 to the maximum number of days in the specified month
Range: 1 to 31
Increment: 1
*RST: 1
Example:
SYSTem:DATE?
Returned value: 2022,09,28
Usage: Asynchronous command
SYSTem:EXIT
Starts the shutdown of the firmware.
Usage:
Setting only
Asynchronous command
SYSTem:FW:FILepath <FilePath>
Sets the path and the filename of the firmware installation file.
Parameters:
<FilePath> String with path and filename
Usage: SCPI confirmed
Asynchronous command
SYSTem:PRESet
Resets the instrument to the default state, has the same effect as *RST.
Usage:
Setting only
SCPI confirmed
Asynchronous command
Manual operation: See "Factory preset" on page 95
SYSTem:SHUTdown
Starts the shutdown of the instrument (firmware and operating system).
Instrument setup