Rohde & Schwarz MXO 4 Series - Page 783

Remote control commandsMXO 4 Series
783User Manual 1335.5337.02 ─ 07
SBUS<sb>:CAN:FRAMe<fr>:FDATa<o>:BRS?................................................................. 793
SBUS<sb>:CAN:FRAMe<fr>:DBITrate?........................................................................... 793
SBUS<sb>:CAN:FRAMe<fr>:NBITrate?........................................................................... 794
SBUS<sb>:CAN:FRAMe<fr>:COUNt?..............................................................................794
SBUS<sb>:CAN:FRAMe<fr>:SBC?................................................................................. 794
SBUS<sb>:CAN:FRAMe<fr>:XDATa<o>:FCRC?...............................................................795
SBUS<sb>:CAN:FCOunt?
Returns the number of decoded frames for the CAN protocol analysis.
Suffix:
<sb>
.
1...4, index of the serial bus
Return values:
<Count>
Usage: Query only
Asynchronous command
SBUS<sb>:CAN:FRAMe<fr>:ACKState?
Return the states of the acknowledgment field.
Suffix:
<sb>
.
1...4, index of the serial bus
<fr> index of the frame
Return values:
<FrameAckState> OK | ERRor | UNDF
UNDF: Undefined
*RST: OK
Usage: Query only
Asynchronous command
SBUS<sb>:CAN:FRAMe<fr>:ACKValue?
Returns the value of the acknowledge slot for the selected frame.
Suffix:
<sb>
.
1...4, index of the serial bus
<fr> index of the frame
Return values:
<FrameAckValue> Range: 0 to 1
Increment: 1
*RST: 0
Usage: Query only
Asynchronous command
Protocols