Rohde & Schwarz SMU200A - Front Panel Key Emulation

Manual Operation
R&S
®
SMU200A
121Operating Manual 1007.9845.32 ─ 15
Front-panel key Key of PC keyboard Function
MENU CTRL + M Calls the menu selection list.
MOD ON/OFF CTRL + O Switches modulation on/off. "MOD OFF" is indicated
in the status line.
TOGGLE CTRL + T Switches a block or parameter on/off.
Toggles between the different possibilities of setting
a selection parameter.
PRESET CTRL + P Restores a defined basic instrument setup.
REARR CTRL + A Adjusts the size of the active menu to use the whole
height of the dislay.
RECALCULATE CTRL + C Starts recalculation of the signal.
RF ON/OFF CTRL + R Switches the RF output signal on/off. "RF OFF" is
indicated in the status line.
Both RF output signals are always deactivated in the
case of two-path instruments.
SETUP CTRL + E Opens the setup menu for general instrument set-
tings.
Softkeys CTRL + F1 – F8 Triggers the function assigned to the softkey.
WINBAR CTRL + W Displays the Winbar in the foreground/background.
4.8.1 Front Panel Key Emulation
The R&S SMU provides a front panel key emulation to enable execution of the front panel
key functions by mouse e.g. for remote access. The emulation is called by a right mouse
click. The front panel key functions are executed by a mouse click on the associated
button.
Legend of Front-Panel Controls