Rohde & Schwarz SMU200A - Hcopy:file[:Name]:Auto[:File]:Day; Hcopy:file[:Name]:Auto[:File]:Month

Remote Control Commands
R&S
®
SMU200A
536Operating Manual 1007.9845.32 ─ 15
HCOP:DEV:LANG BMP
selects output format *.bmp.
HCOP:FILE:AUTO:DIR 'E:/HCopy'
defines the destination directory 'E:/HCopy'
HCOP:FILE:AUTO:PREF 'gen'
the file name starts with the prefix 'gen'. The usage of automatic
naming with prefix and date in the file name is preset (…:STAT
ON).
HCOP
triggers the generation of a hardcopy of the current trace.
HCOP:FILE:AUTO:FILE?
queries the file name
Response: 'gen101012008001.bmp'
Example:
Query onlyUsage:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY?
The command returns the day of the current system date which will be used in the file
name if automatic naming is activated.
Return values:
float<Day>
HCOP:FILE:AUTO:DAY?
returns the day in the date part of the automatic file name.
Example:
Query onlyUsage:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY:STATe <State>
This command activates the usage of the day in the automatic file name.
Parameters:
0|1|OFF|ON
ON
<State>
*RST:
HCOP:FILE:AUTO:DAY:STAT OFF
deactivates the use of the day in the automatically generated file
name.
Example:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh?
This command queries the month in the date part in the automatic file name.
Return values:
float<Month>
HCOP:FILE:AUTO:MONT?
queries the month in the date part in the automatic file name.
Example:
HCOPy Subsystem