Rohde & Schwarz SMU200A - Hcopy:file[:Name]:Auto[:File]:Year; Hcopy:image:format

Remote Control Commands
R&S
®
SMU200A
538Operating Manual 1007.9845.32 ─ 15
HCOP:FILE:AUTO:PREF:STAT OFF
deactivates the usage of the prefix in the automatic file name.
Example:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR?
This command queries the year in the date part in the automatic file name.
Return values:
float<Year>
HCOPy:FILE:AUTO:YEAR?
queries the year in the date part in the automatic file name.
Example:
Query onlyUsage:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR:STATe <State>
This command activates the usage of the year in the automatic file name.
Parameters:
0|1|OFF|ON
ON
<State>
*RST:
HCOP:FILE:AUTO:YEAR:STAT OFF
deactivates the usage of the year in the automatic file name.
Example:
:HCOPy:FILE[:NAME]:AUTO:STATe <State>
This command activates/deactivates automatic naming of the hardcopy files.
Parameters:
0|1|OFF|ON
ON
<State>
*RST:
HCOP:FILE:AUTO:STAT OFF
deactivates automatic naming.
Example:
:HCOPy:IMAGe:FORMat <Format>
This command selects the bitmap graphic format for the screenshot. It is also possible
to directly retrieve the data using command HCOP:DATA?.
This command is an alias to command HCOPy:DEVice:LANGuage.
Parameters:
BMP|JPG|XPM|PNG
BMP
<Format>
*RST:
HCOPy Subsystem