Rohde & Schwarz SMU200A - [:Source<Hw>]:Bb:DM:flist:select; [:Source<Hw>]:Bb:DM:mlist:delete; [:Source<Hw>]:Bb:DM:mlist:points

Remote Control Commands
R&S
®
SMU200A
653Operating Manual 1007.9845.32 ─ 15
[:SOURce<hw>]:BB:DM:FLISt:SELect <Select>
The command selects the user-defined filter (*.vaf).
The directory applicable to the following command is defined with the command
MMEM:CDIRectory. To access the files in this directory, only the file name is required,
without the path and the file extension.
Parameters:
string<Select>
BB:DM:FILT:TYPE USER
selects the User filter type.
MMEM:CDIR 'D:/user/Filter_List'
sets the default directory for the user-defined filters.
BB:DM:FLIS:SEL user_filter3
selects the user-defined filter.
Example:
[:SOURce<hw>]:BB:DM:MLISt:DELete <Delete>
Deletes the secified user mapping file. The default directory is set using command
MMEM:CDIRectory. A path can also be specified, in which case the files in the specified
directory are read. The file extension may be omitted. Only files with the file extension
*.vam will be deleted.
Setting parameters:
string<Delete>
BB:DM:FORM USER
selects the User modulation type.
MMEM:CDIR 'D:/user/mapping_List'
sets the default directory for the user mapping lists.
BB:DM:MLIS:DEL user_mapping3
deletes the user mapping list.
Example:
Setting onlyUsage:
[:SOURce<hw>]:BB:DM:MLISt:POINts?
Queries the user modulation mapping list length.
Return values:
float<Points>
BB:DM:FORM USER
selects the User modulation type.
BB:DM:MLIS:POIN?
queries the list length.
Example:
Query onlyUsage:
SOURce Subsystem